- 电压击穿试验仪
- 介电常数
-
电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:高温绝缘电阻率测试仪
-
石墨电极电阻率测试仪
-
210-炭块电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:121T-高温电阻率测试...
-
落球回弹试验仪,介电击穿强度测定仪:多功能极片电阻测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121A-绝缘电阻率测试...
-
点对点对地电组率测试仪
-
油介质损耗电阻率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:121A1-热刺激电流测...
-
121B-全自动电阻率测...
-
高低温绝缘电阻率测量系统
-
落球回弹试验仪,介电击穿强度测定仪:121-体积表面电阻率测...
-
落球回弹试验仪,介电击穿强度测定仪:新-高温电阻率测试仪
- 粉末电阻率测试仪
- 落球回弹试验仪,介电击穿强度测定仪:导体、半导体电阻率
- 耐电弧测试仪
- 漏电起痕试验仪
- 电池隔膜电弱点测试仪
- 橡胶塑料检测仪器
- 力学性能检测仪器
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫材料检测仪器
-
泡沫起升仪
-
新-泡沫分析仪
-
海绵泡沫切割机
-
织物透气率测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩变形试验箱
-
海绵压缩变形试验机
-
落球回弹试验仪,介电击穿强度测定仪:海绵落球回弹试验仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵泡沫密度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压陷硬度测试仪
-
落球回弹试验仪,介电击穿强度测定仪:海绵压缩蠕变测试仪
-
海绵空气透气率测试仪
-
海绵往复冲击疲劳试验机
-
海绵泡沫缓冲能量试验机
-
2000-海绵拉伸撕裂试...
-
落球回弹试验仪,介电击穿强度测定仪:1000-海绵拉伸撕裂试...
-
慢回弹泡沫复原时间测试仪
-
落球回弹试验仪,介电击穿强度测定仪:新-慢回弹泡沫复原时间测...
-
泡沫起升仪
- 落球回弹试验仪,介电击穿强度测定仪:受电弓/碳滑板检测仪器
- 落球回弹试验仪,介电击穿强度测定仪:材料热物理性能实验设备
- 热物性检测仪器
-
粉末测试设备
-
霍尔流速计
-
真密度测试仪
-
斯柯特容量计
-
休止角测定仪
-
粉末压实密度仪
-
振实密度测试仪
-
颗粒图像分析仪
-
全自动真密度仪
-
塑料流动性测定仪
-
粉尘安息角测试仪
-
落球回弹试验仪,介电击穿强度测定仪:多功能压力测量系统
-
粉末自然堆积密度仪
-
粉体综合物性测试仪
-
氧化铝流动角测定仪
-
落球回弹试验仪,介电击穿强度测定仪:塑料表观密度测试仪
-
普通磨料堆积密度仪
-
落球回弹试验仪,介电击穿强度测定仪:白土堆积密度测定仪
-
氧化铝流动时间测定仪
-
压实密度粉末电阻率仪
-
落球回弹试验仪,介电击穿强度测定仪:陶粒砂体积密度测定仪
-
氧化铝松装密度测定仪
-
落球回弹试验仪,介电击穿强度测定仪:表面活性剂表观密度仪
-
落球回弹试验仪,介电击穿强度测定仪:自由流动堆积密度测定仪
-
超硬材料堆积密度测定仪
-
霍尔流速计
- 比表面测试仪
- 电池检测
- 燃烧性能试验机
- 金属检测仪器
-
焙烧炉试验机
ASTMD495耐高压低电流电弧放电试验机
高交流电压小电压现场实验仪(耐电弧焊接现场实验仪)-(换算机把握)
High voltage low current tester (arc resistance tester) - (computer control)
产品的分类:耐电弧试验机
Product name: electric arc resistance tester
物品应用:NDH-A
Product model: NDH - A
达到标准:GB/T 1411-2002《固态物耐压原料耐高放低交流电脉冲充放的试验台》(共同IEC 61621-1997)及ASTM D495等规则的需要设置产生的,并完全符合IEC 149、UL
Meet the standards: GB/T 1411-1411 "solid insulating material resistant to high voltage low current arc discharge test" (equivalent to IEC 61621-1997) and the requirements of standards such as ASTM D495 design and manufacturing, and conform to the IEC 149, UL 746 a test method, etc
一 概述
一An overview of the
核心应用规模及实用功能:
本耐压机是根据运应用在电机马达、设备和家庭型设备等餐饮行业的焊工用PVC、光敏聚酯树脂胶和电电绝缘层带层漆等电电绝缘层带层的素材的耐电弧放电放电性能指标参数评判,主应用在混合物电电绝缘层带层的素材如:PVC、溥膜、光敏聚酯树脂、白云母、淘瓷、的玻璃、电电绝缘层带层油、电电绝缘层带层漆、硬纸板等物质的耐电弧放电放电性能指标参数检查;
本可靠性测试机由计算方法机操控进行,就能够显视某个测试睡眠状态及测试时光,测试停止后并保留某个测试动态数据,并可网页打印.基准实验操作报告范文。
Main scope of application and features:
This machine is in accordance with the applied in motor, electrical appliances and household appliances and other industries with varnish insulation materials such as plastic, resin adhesive and the arc resistance evaluation, the main used for solid insulating material such as plastic, film, resin, mica, ceramic, glass, insulating oil, insulating paint, such as cardboard medium arc resistance test;
This testing machine controlled by computer operation, can display the current experimental condition and experimental time, after the experiment, and save the current experimental data and can be printed. Standard experiment report
二 功能特点
1 该机为两排一梯成分,中下部为运作软件,上方为检验箱。
2 本车辆采取*新智力设定技术工艺,依据进行系统(IEC或ASTM)可自行进行测试,并在我的我的电脑表现经过多次实验发现阶段和然而。
3 **耐磨性稳定,抗抑制专业能力强,测式gps精度大。
二:Functional features:
1 this machine is up and down a body structure, lower for the operating system, the upper part of test cases.
2 this product USES the latest intelligent control technology, through the selection process (IEC) or ASTM test can be automatically, and displayed on the computer and the test process and results.
3 good safety performance, strong anti-interference ability, high test precision.
三 主要技术参数
1 焊弧通断時间粗差:小于等于 ±10ms
2 调压器存储容量:2kVA
3 特殊可靠性试验电压降:12.5kV
4 试验装置交流电压精确:±3%
5 瞬时电流设定误差:±10% 交流电校正可靠性强,精密度:1.5%
6 探针对钢材拉伸试验心理压力:(0.5±0.05)N
7 参比电极原材料:钨棒
8 探针间距:(6.35±0.1)mm(IEC)
(6.0±0.1)mm(ASTM)
9 操作条件体温:(23±2)℃
10 便用场景绝对湿度:(50±5)%
11 电源开关:220V±5% 50Hz
12 试验报告 步骤: 新国标/美标/10 mA 反复/20 mA 维持/30 mA累计/40 mA陆续
13 校正方式如下图所示:
| 系统程序段 | 电孤工作电流 mA | 电弧焊接通断期限s | 各软件程序段维持期限s | 做实验的时候总耗时s | |
| | | IEC 61621 | ASTM D495 | | |
| 1 | 10 | 1/8s通 7/8s断 | 1/4s通 7/4s断 | 60 | 60 |
| 2 | 10 | 1/4s通 3/4s断 | 1/4s通 3/4s断 | 60 | 120 |
| 3 | 10 | 1/4s通 1/4s断 | 1/4s通 1/4s断 | 60 | 180 |
| 4 | 10 | 多次通 | 60 | 240 | |
| 5 | 20 | 持续通 | 60 | 300 | |
| 6 | 30 | 陆续通 | 60 | 360 | |
| 7 | 40 | 重复通 | 60 | 420 | |
Three main technical parameters:
Error: 1 arc on-off time less than plus or minus 10 ms
Transformer capacity: 2 kva
3 test voltage rating: 12.5 kV
4: test voltage accuracy + / - 3%
5 current control accuracy: plus or minus 10% current measuring accuracy: 1.5%
6 electrode pressure on sample: (0.5 + 0.5) N
7 electrode materials: tungsten rods
8 electrode distance: 6.35 + / - 0.1 mm (6.0 + 0.1) mm (IEC) (ASTM)
9 using the environment temperature (23 + 2) ℃
10 use environment humidity: (50 + 5) %
Power supply: 220 v + 5% for 50 hz 10 a
Test method: beautiful mark / 10 gb / 30 mA mA continuous / 20 mA continuous/continuous / 40 mA continuous
13 test procedure is as follows:
Procedures section of the arc current
MA arc on-off time s the program s test total duration time s
IEC 61621 ASTM D495
1 1/8 10 s on 7/8 s broken 1/4 7/4 break 60 s 60 s
2 10 1/4 "s pass 3/4 s 1/4 3/4 break 60 s 120 s
3 to 10 1/4 "s make a quarter s break a quarter of a quarter break 60 s 180 s
4 consecutive 10 to 60, 240
5 20 consecutive 60, 300
30 consecutive 6 to 60, 360
7 consecutive 40 to 60, 420
四 配置
| 数字序号 | 标题 | 个数 | 备注栏 |
| 01 | 耐弧光测评仪 | 买台 | |
| 02 | 电极材料控制系统 | 几套 | |
| 03 | 参比电极橡胶支座 | 一套套 | |
| 04 | 电源开关电揽 | 这套 | |
| 05 | 一定接地放** | 一瓶 | |
| 06 | 瞬时电流毫安表 | 买台 | |
| 07 | 笔记本电脑测控应用 | 整套 | |
| 08 | 试件材料架 | 一支队伍 | |
| 09 | 电极片相距规格块 | 2块 | |
| 10 | 角度看基准块 | 2块 | |
| 11 | 瓷质片 | 2片 | |
| 12 | 喷墨直接佳能打印 | 1台 | 企业品牌 |
| 13 | 计算出来机 | 1台 | 加盟品牌 |
| 14 | 采用说书 | 1份 | |
| 15 | 通过率证 | 1份 | |
Four configuration:
Serial number name number note
01 arc resistance tester
02 a electrode system
03 electrode bearing a set
04 a set of power cable
05 ground put a rod
06 milliammeter current one
7 a set of computer measurement and control software
08 specimen holder a
09 electrode distance standard 2 blocks
Standard 2 blocks of 10 Angle
11 ceramic pieces 2 pieces
12 one brand inkjet printer
13 1 computer brand
14 1 instruction manual
15 1 certificate
五 物料技术参数:
NDH-A 耐电弧放电试验装置仪-微机操纵
NDH-B 耐电弧放电试验检测仪-触控屏掌握
Five product model:
NDH - A arc resistance tester - microcomputer control
NDH - B arc resistance tester - touch screen control
ASTMD495耐高压低电流电弧放电试验机详情可以随时来电咨询!